Chimney cowl Windkat Ø 300 mm with base plate

OEG no.: 510700050
Zoom Chimney cowl Windkat Ø 300 mm with base plate
OEG no. : 510700050

Windkat systems with injection nozzles are the optimum solution for achieving maximum, even draw in chimneys. Wind can affect the suction effect of a conventional chimney in such a way that it may cause exhaust gas accumulation in the chimney and the escape of dangerous CO and CO2 into the living space...

All product information Scope of delivery
Related products
Wipe 'n' Buy ®
Wipe 'n' Buy

Windkat systems with injection nozzles are the optimum solution for achieving maximum, even draw in chimneys. Wind can affect the suction effect of a conventional chimney in such a way that it may cause exhaust gas accumulation in the chimney and the escape of dangerous CO and CO2 into the living space. A Windkat cowl reliably prevents this with its injection nozzles.The innovative design of the cowls always creates the required suction by negative pressure - even low exhaust temperatures allow optimum chimney operating conditions. The aerodynamic properties of the Windkat system can be measurably calculated in terms of wind influence according to the new DIN EN 13384-1. The operating mode has been TÜV-tested. Due to improved combustion efficiency, it saves heating costs. Thw Windkat can be used for gas- and oil-fired as well as for solid-fuel fireplaces. It can be mounted easily and without much time-consuming effort. The chimney cowl does not require any building approval. It complies with all demands of the FeuVO and DIN 18160. The material is guaranteed stainless and resistant to wind and weather.

Suitable for the internal space of the fireplace square or rectangular of 230 x 230 to 270 x 270 mm. The Windkat tube is placed centrically above the chimney opening.


Scope of delivery:
1 xChimney cowl
1 xBase plate plate with inner pipe

For more information see Downloads


OEG no. 510700050
Mounting type: Base plate
Installation opening [mm]: 230 - 270
Nominal size [DN]: 300
Weight [kg] 11.8
Customs tariff number 73269098
en
Question:

Bonjour, Je souhaiterais savoir quelle est la dimension hors-tout de la plaque rectangulaire de base servant de base à ce chapeau Windkat (DN 300mm). Je vous remercie de votre réponse. Bien cordialement

Answer OEG:

Les dimensions de la plaque de base sont 500 x 500 mm.

You have to be logged in to ask a question

Average customer assessment
Bewertungen
en 24/08/2015, 10:56:48 of: Mr Pascal

Chapeau

Chapeau de cheminée Windkat avec de bonnes performances en zone de refoulements possibles

In order to give a review, you have to be logged in.