Solar station with solar circulation pump PWM

OEG no.: 512245033
  • Also replaces
    schließen Also replaces: 516003135 (Single-line solar station with OEG solar pump CPAE 55/25 S PWM) ,
    516003139 (OEG dual-line solar station with solar circulation pump CPAE 55/25 S, PWM 130mm) ,
    516003142 (OEG Dual-line solar station with solar circulation pump CPAE 55/25 S, PWM 130mm) ,
    516004344 (OEG 2-line solar system with Wilo Yonos Para ST 15/7) ,
    516007344 (OEG single-line solar station DN 20 with Wilo Yonos Para ST 15/7) ,
    516003130 (OEG Two-line solar station with 6 m solar pump PWM)
Zoom Solar station with solar circulation pump PWM
OEG no. : 512245033

The OEG solar station is a compact fitting group for heat transfer from the collector to the storage tank in solar thermal systems. The compact design of the station allows for easy and quick installation with low space requirements...

All product information Scope of delivery
Wipe 'n' Buy ®
Wipe 'n' Buy

The OEG solar station is a compact fitting group for heat transfer from the collector to the storage tank in solar thermal systems. The compact design of the station allows for easy and quick installation with low space requirements. The circulation pump is provided with various operating modes. The pump can be speed-controlled via a PWM signal of the differential controller. Two characteristic lines are available for that.

Note: Using the PWM control is not necessarily required. A combination with existing control units is possible.


Scope of delivery:
1 xventing unit with manual bleeder
1 xflow meter with flow rate indicator 0.5-15l/min., integrated flow restriction, flushing/filling and draining unit
1 xBall valve with thermometer red 3/4" for solar station
1 xBall valve with thermometer blue 3/4" for solar station
1 xmounting bracket for one controller
1 xEPP insulation
1 x Solar circulation pump DN20 with 130 mm overall length and PWM activation
1 x Safety group for solar station
 
Spare parts:
Solar circulation pump DN20 with 130 mm overall length and PWM activation
Safety group for solar station
Solar pressure gauge Ø 63 mm up to 130 °C 1/4

For more information see Downloads


OEG no. 512245033
Material: Brass
Connection: 4 x 3/4" ET
Operating pressure max. [bar]: 6
Operating temperature [°C]: 120
Length x Width x Height [mm]: 440 x 280 x 150
Suitable for overall pump length [mm]: 130
Manufacturer OEG
Also replaces 516003135, 516003139, 516003142, 516004344, 516007344, 516003130
Weight [kg] 6
Customs tariff number 84199085 (EEC)
en
Question:

Bonjour, j'ai besoin de commander le thermomètre car celui reçu sur la dernière commande est hs. Pourriez-vous me donner la référence afin que je puisse commander cela ou m'en faire parvenir un. Merci d'avance pour votre retour. Cordialement Arthur

Answer OEG:

N° art. OEG: Manomètre solaire Ø 63 mm jusqu'à +130 °C 1/4" axial

en
Question:

Dans notre installation, la longueur du circuit est de 30m, le dénivelé est de 8m. La surface de captage est de 4m² en harpe. La puissance de la pompe est-elle suffisante ?

Answer OEG:

Le circulateur solaire  (n° d'art. ) du kit n'a qu'une hauteur de refoulement de 7,5 m, un circulateur solaire avec une hauteur de refoulement de 8 m serait par exemple l´article .

en
Question:

Frage: Wir haben eine vorhandene Einfamilienhaus-Anlage von Solvis mit 4 Kollektoren und 800 L Speicher, wo die Zahnradpumpe defekt ist. Kann die Anlage auf diese Solarstation umgerüstet werden? Antwort OEG: Hallo. Für die Solaranlage mit den vier Kollektoren reicht die diese Solarstation auf jeden Fall aus. Hallo OEG! wenn die Frage nach dem Ersatz für eine Zahnradpumpe mit JA beantwortet wird, löst OEG einen Fehlkauf mit viel Ärger aus. Es handelt sich wohl um eine Solvisanlage mit sehr kleinem 10-12mm Cu Rohr. Da bekommt man ohne Zahnradpumpe nix durch. Die Frage ist nicht fachkundig beantwortet. mfg

Answer OEG:

Es tut uns leid das sie mit unserer Pumpengruppe unzufrieden sind. Welche "Zahnradpumpe" sollte dort ersetzt werden? Ohne die bauliche Situation zu kennen sind Pauschalausagen schwierig. In der OEG Solar-Station wird eine Umwälzpumpe mit 7.5m Förderhöhe eingesetzt, also leistungsstärker als eine Standard-Pumpe. Wir nutzen sie häufig für unsere 4Plus Mäander-Kollektoren (Rohrdurchmesser 12mm).

en
Question:

Ist für die mitgelieferte Pumpe zwingend eine PWM Signal erforderlich oder lässt sich diese auch ohne Signal betreiben? Sprich An/Aus.

Answer OEG:

In der Solarstation ist die Pumpe mit der Artikelnummer verbaut. Alle benötigten Informationen zum Anschluss und zur Einstellungen finden Sie dort in den Downloads.

en
Question:

Wir haben eine vorhandene Einfamilienhaus-Anlage von Solvis mit 4 Kollektoren und 800 L Speicher, wo die Zahnradpumpe defekt ist. Kann die Anlage auf diese Solarstation umgerüstet werden?

Answer OEG:

Hallo.

Für die Solaranlage mit den vier Kollektoren reicht die diese Solarstation auf jeden Fall aus.

en
Question:

Welk artikelnummer van 3/4" 2 delige koppeling (vlak afdichtend) pas je toe om de CPA-E 55/15 S, PWM aan te sluiten, 4 stuks. En welke leiding diameter is voor geschreven tussen de spiraal van de 400 liter hygieneboiler en welke diameter tussen de 3 panelen en de CPA-E 55/15 S, PWM

Answer OEG:

Goedemorgen,

de pompkoppelingen worden al meegeleverd met de pomp, maar zijn eventueel ook los te bestellen: .

Als leidingwerk kunt u een spriaalbuis kiezen DN16, deze hebben wij in verschillende lengtes, deze kunt u hier vinden:

RVS spiraalbuis Twin

en
Question:

is dit met of zonder verschilregelaar KSW?

Answer OEG:

Goedemiddag, deze wordt geleverd met een OEG verschilregelaar van de KS2W-serie

en
Question:

Bonjour il s'agit de capteurs baxy de 2 M2 chacun raccordés avec du cuivre d22

Answer OEG:

Bonjour,

Le fabricant n'est pas Baxi, les composants sont en DN 20. Les raccords sont en 3/4'' FM de chaque côté.

Cordialement,
Votre équipe OEG

en
Question:

Bonjour,est ce que caette station est compatible avec un SSC comprenant 7 capteurs solaires en série (en remplacement d'une pompe Wilo ST20/7-3C)? Merci,Yann

Answer OEG:

Merci de nous donner plus de renseignements: hauteur, type de capteur, harpe ou méandre, diamètre des tuyaux...

Cette station est certainement trop petite. Voir référence .

You have to be logged in to ask a question

Average customer assessment
Bewertungen
en 02/02/2020, 15:00:34 of: Mr EcoKlima GmbH

Nicht optimal

Der Anschluss am Überdruckventil ist über der Pumpe! Es kann nur ein flexiber Schlauch angeschlossen werden, selbst mit PE-RT rohren ist es ein zimliches gewürge. Wenn man mit Temperaturen von fast 100°C rechnet, ist ein Kunststoffschlach warscheinlich nicht optimal.. Für den Preis könnte man ein 15mm längeres Rörchen wohl erwarten..

  • OEG
Reply from OEG :

Danke für den Hinweis zum Sicherheitsventil. Wir sind bemüht ihrer Anmerkung nachzukommen.

Es wird ein Update der Umwälzpumpe erfolgen, sodass der Pumpenkopf nach vorn ausgerichtet ist.

Durch die schmalere Bauform wird der Zugang erleichtert. 

In order to give a review, you have to be logged in.