You are using an outdated browser. Please update your browser now to display the page correctly.
Delivery the next working day
Right of return 14 days
OEG Solar storage tank - highest quality "Made in Germany"!
The OEG solar storage tank 3Plus is suitable not only for heating domestic hot water with boilers and low-temperature heating systems but particularly for the additional connection of a solar system...
All product informationStorage tanks A+
10-year warranty
High Quality
TÜV Rheinland
Delivery by forwarding agency
OEG Solar storage tank - highest quality "Made in Germany"!
The OEG solar storage tank 3Plus is suitable not only for heating domestic hot water with boilers and low-temperature heating systems but particularly for the additional connection of a solar system.
Very often, the storage tank is used as a new installation but also as a replacement tank. Thanks to the wide range of selectable coating colours and the various connection options, a combination with heat generators and solar systems of almost any manufacturer is possible.
The inner surface of the tank is coated with high-quality enamel to ensure the hygienic heating of drinking water. The generously-dimensioned heat exchanger surface of the lower smooth-pipe heat exchanger reaches down to the bottom of the tank, and thus provides a high energetic advantage compared to many other products in the market.
The service hatch allows for convenient maintenance and cleaning of the tank.
Suitable for: | ||
Solar package 2plus solar storage tank and 2 collector panels |
For more information see Downloads
Rated volume according to EN 12897: | 200 |
Colour: | silver |
Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
Weight [kg]: | 90 |
Total height including insulation [mm]: | 1265 |
Diameter with insulation [mm]: | 610 |
Tilt height [mm]: | 1375 |
Heat retaining loss according to EN 12897 [W]: | 31 |
Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,744 |
Output capacity (45°C) [l]: | 315 |
Performance indicator NL following DIN 4708: | 5 |
Real volume according to EN 12897 [l]: | 200 |
pmax Tank [bar]: | 10 |
tmax Tank [°C]: | 95 |
tmin Tank [°C]: | 20 |
Smooth-pipe heat exchanger [number]: | 2 |
Smooth-pipe heat exchanger area bottom [m²]: | 1,15 |
Smooth-pipe heat exchanger area top [m²]: | 0,63 |
Smooth-pipe heat exchanger volume bottom: | 7,50 |
pmax Smooth-pipe heat exchanger [bar]: | 10 |
tmax Smooth-pipe heat exchanger [°C]: | 130 |
Connection layout: | 180° |
Connection sensor [Ø mm / terminal]: | 6 mm |
Connection cold / hot water: | R 1" |
Connection heat exchanger [thread]: | Rp 1" |
Connection circulation: | R 3/4" |
Connection heating element [thread]: | Rp 1 1/2" |
Service hatch (LK 150): | 115 / 180 |
Max. immersion depth of flange heater [mm]: | 420 |
Max. immersion depth of screw-in heater [mm]: | 400 |
De afmetingen van al onze boilers staan op de OEG-website aangegeven.
Geef het betreffende artikelnummer in: Solar storage tank TWS 200-2 with 2 smooth-pipe heat exchangers
Scroll naar beneden.
Aan de rechterzijde van het scherm staan alle maten aangegeven.
Bonjour,
Il n'est pas possible d'indiquer le débit en kW, car il s'agit d'une valeur normalisée qui ne concerne que l'eau chaude sanitaire. Pour donner une indication en litres, il faudrait nous donner les paramètres correspondants que le système de chauffage possède pour l'eau chaude sanitaire, puis il faudrait le cycle dans lequel les plus grandes quantités sont prises.
Le débit est la quantité d'eau potable chauffée qui peut être retirée de l'échangeur thermique à tubes lisses jusqu'à ce qu'elle soit remplie par le bas. Il ne faut pas s'en tenir à cela, car le remplissage a lieu directement lors de l'évacuation de l'eau et la température du réservoir de stockage et de l'eau froide qui est introduite dans le réservoir de stockage par le bas donne, par exemple, 45°C dans l'échangeur thermique. Dès que le réservoir de stockage a été complètement réchauffé (dans le chauffe-eau et jusqu'à la zone dans laquelle l'eau froide s'écoule), vous disposez de 315 litres d'eau potable chaude jusqu'à ce qu'elle doive être à nouveau traitée.
Hello, Is the solar boiler with two heat exchangers also available with the second heat exchanger for a heat pump instead of a traditional heat profider (gas or oil)? Kind regards, Guy
Hello,
We have the normal heat pump boilers. You can also search for "reverse plus" tanks, these are new in our range. Due to the vapour-tight insulation, these are also suitable as a cooling buffer.
hello. Can you tell me the volume of water heated when just using the top coil for the 200l and 300l versions please. From the drawings it looks like the top coil is very high up in the tank. Thanks .
Hello.
The top heating spiral's got a volume of 4,2 litres and the area of the surface is about 0,63 m². I hope, that I could help you with this information, otherwise you can contact us again.
Bonjour,
Le raccordement de la résistance électrique se fait par le bas, car avec le raccordement par le bas dans le ballon, le résistance électrique déclenche une circulation. Le fait que l'eau chaude ait une densité plus faible la fait monter et pousse ainsi l'eau plus froide vers le bas, ce qui permet de chauffer toute l'eau tampon à moyen et à long terme sans avoir besoin d'un type de pompe.
Cordialement,
Votre équipe OEG