You are here:
-
Print
26.0 kW pool heat pump with titanium heat exchanger
OEG no.: 650001200
Inverter pool heat pump for forward-looking heating and cooling of pool water.
The pump provides high energy efficiency and stands out due to its lower energy consumption of up to 80% compared to conventional heating systems...
Related products
Low-noise
Delivery by forwarding agency
CE
Refrigerant_R290
36 months warranty
Inverter pool heat pump for forward-looking heating and cooling of pool water.
The pump provides high energy efficiency and stands out due to its lower energy consumption of up to 80% compared to conventional heating systems.
The inverter technology allows for a smart and efficient control of the heat supply, with the result of a significantly lower power consumption but identical heating and cooling capacity.
A powerful compressor and an evaporator with a large heat exchanger surface are the heart of the pumps. The titanium heat exchanger has a patented, completely state-of-the-art double frost protection system.
The innovative technology is packed into a robust ABS housing with a UV-resistant and easy-to-clean surface.
This inverter pool heat pump is controlled by a user-friendly and intuitive control unit. After the easy installation by a technician, the customer can select his desired pool temperature in the display very easily.
The environment-friendly refrigerant R290 with high cooling capacity is used as energy transfer medium.
OEG inverter pool heat pumps are extremely durable with top-quality components. They provide you with pleasantly temperated pool water at any time.
| Scope of delivery: | |||
| 1 x | heat pump with flow switch | ||
| 4 x | vibration damper | ||
| 1 x | winter cover | ||
| 2 x | Connection fitting 50 x 1 1/2" ET | ||
| 1 x | condensate draining kit | ||
| 1 x | installation and operating instructions | ||
| 1 x | wired control unit with about 1 m length | ||
| Spare parts: | |||
|
Low-pressure sensor for pool heat pump |
|
|
|
Water flow sensor for R290 pool heat pump |
|
|
|
Filling valve for refrigerant of OEG pool heat pump |
|
|
|
Connecting cable for OEG pool heat pumps |
|
|
|
Electric transformer for OEG pool heat pump |
|
|
|
Outside temperature sensor for OEG pool heat pump |
|
|
|
Universal temperature sensor for pool heat pump |
|
|
|
Main circuit board PCB for pool heat pump |
|
|
|
IPM module circuit board for pool heat pump |
|
|
|
Cover for controller of pool heat pumps |
|
|
|
Air outlet grid for pool heat pump and air/water heat pump |
|
|
|
4-way valve for pool heat pump and air/water heat pump |
|
|
|
Phase sequence protection board for pool heat pump |
|
|
|
Fan capacitor for pool heat pump |
|
|
|
Contactor for pool heat pump |
|
|
|
Fan motor heat pump R32 | R290 and pool heat pump |
|
|
For more information see Downloads
| OEG no. | 650001200 |
| Output [kW]: | 26 |
| Refrigerant: |
Refrigerant_R290
|
| Pool capacity [m³]: | 80 .. 110 |
| Voltage [V]: | 400 |
| Flow rate [m³/h]: | 11.22 |
| Current max. [A]: | 10 |
| Power consumption [kW]: | 6 |
| Length x Width x Height [mm]: | 1,114 x 505 x 715 |
| Content coolant [kg]: | 1.00 |
| Power consumption [A]: | 9.12 |
| Sound pressure level [dB]: | 58 |
| Housing: | Plastic |
| Colour: |
 Grey 
|
| Protection type [IP]: |
 IPX4 
|
| Manufacturer | OEG |
| EAN | 4055668025540 |
| Weight [kg] | 69 |
| Notes |
Low-noise
Delivery by forwarding agency
CE
Refrigerant_R290
36 months warranty
|
| Customs tariff number | 84186100 (CN) |
Question:
beste bestaat de 26 kw uitvoering ook in 3 x 220 v of 2 x 220 v ? dank voor uw antwoord
Answer OEG:
Helaas niet
Question:
Beste , kan deze zwembadwarmtepomp gebruikt worden voor een binnenzwembad waarbij de unit buiten geplaatst wordt tijden de wintermaanden , want ik lees namelijk in de gebruiksaanwijzing dat bij temperaturen minder dan 3°C de pomp uitgeschakeld wordt...hoe dan zwembad verwarmen tijdens de wintermaanden ?
Answer OEG:
Als de omgevingstemperatuur in de wintermaanden onder de 3°C daalt, moet u uw warmtepomp winterklaar maken om vorstschade te voorkomen.
Om de warmtepomp goed te laten functioneren, moet de omgevingsluchttemperatuur tussen +2 en 43 °C liggen.
