You are here:
-
Print
3/4" solenoid valve with FKM seal E4324/1002./012
OEG no.: 113123220
2/2-way solenoid valve with servo-assisted diaphragm for gaseous and liquid media in closed systems such as heating circuits as well as in machinery and plant engineering. The valve is normally closed...
All product information
PU
IP65
2/2-way solenoid valve with servo-assisted diaphragm for gaseous and liquid media in closed systems such as heating circuits as well as in machinery and plant engineering. The valve is normally closed when de-energised and intended for installation with the solenoid coil in an upright position.
For more information see Downloads
| OEG no. | 113123220 |
| Switch-on time: | 100 % ED |
| Design: | Force-controlled |
| Opening characteristics: | Normally closed (NC) |
| Type: | Series 43 |
| Connection size [inch]: | 3/4 |
| kv-value: | 11 m³/h |
| Seal: | FKM |
| Pressure [bar]: | 0 .. 10 |
| Voltage [V]: | 230 |
| Media temperature [°C]: | -10 .. 100 |
| Media: | Oils, Fuels |
| Manufacturer | GSR |
| Manufacturer number | E4324/1002./012 |
| Also replaces |
|
| Weight [kg] | 1.5 |
| Notes |
PU
IP65
|
| Customs tariff number | 84818087 |
Question
Beste OEG, Wij willen deze magneetklep (en ook de ½ "en 1"uitvoering) gaan toepassen op onze branders. De klep heeft de functie om na de pomp als extra veilighieds klep te functioneren.De klep gaat gelijktijg open met het starten van de oliepomp.De druk die de oliepomp geeft is 16 bar.Kunnen wij deze klep op deze wijze toepassen ?
Answer OEG:
De kleppen zijn alleen geschikt tot maximaal 10 bar. Als de magneetklep echter voor de oliepomp in de olieleiding wordt geplaatst, kan dit zo worden gemonteerd.
You have to be logged in to ask a question
23/01/2017, 14:35:55 of: Mr Feld
gut
Die Magnetventil von GSR sind sehr zuverlässig
Technical data sheet (PDF)
- 0.33MB