This OEG buffer storage tank fulfills the highest demands on heat storage, particularly where heat generators are used which achieve their optimal efficiency only under full load (e...
All product informationRelated products
Storage tanks A+
10-year warranty
High Quality
TÜV Rheinland
Delivery by forwarding agency
This OEG buffer storage tank fulfills the highest demands on heat storage, particularly where heat generators are used which achieve their optimal efficiency only under full load (e.g.: many solid fuel boilers). During the operation of the heat generator, more heat is generated than is retrieved by the consumers. The excess heat then heats up the water of the buffer tank and is stored there.
During stand-still periods this heat can be retrieved later as needed.
The OEG buffer storage tank is suitable as a primary cylinder for solar systems, heat pumps, wood or pellet boilers and can also be used in district heating systems.
Due to the two additional smooth-pipe heat exchangers, more heat generators can be integrated and their energy can be additionally fed into the buffer tank.
For more information see Downloads
| OEG no. | 516008202 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
10-year warranty
High Quality
TÜV Rheinland
Delivery by forwarding agency
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 200 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 87 |
| Total height including insulation [mm]: | 1265 |
| Diameter with insulation [mm]: | 610 |
| Tilt height [mm]: | 1375 |
| Heat retaining loss according to EN 12897 [W]: | 31 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,744 |
| Real volume according to EN 12897 [l]: | 202 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 2 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,15 |
| Smooth-pipe heat exchanger area top [m²]: | 0,63 |
| Smooth-pipe heat exchanger volume bottom: | 7,50 |
| Smooth-pipe heat exchanger volume top: | 4,20 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection heat generator [thread]: | Rp 1" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 500 |