The OEG combination tank is perfectly suitable for drinking water heating and as a simultaneous support for the heating system due to its innovative tank-in-tank-system...
All product informationRelated products
10-year warranty
High Quality
Delivery by forwarding agency
The OEG combination tank is perfectly suitable for drinking water heating and as a simultaneous support for the heating system due to its innovative tank-in-tank-system.
Ideal for hot water heatings, heat pumps, condensing, oil and gas boilers, solar heating, pellet and wood systems, wood burners and block heating systems. Also ideal as an addition to already existing units.
For more information see Downloads
| OEG no. | 516005424 |
| Fresh water alternative: | 516008230 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Notes |
10-year warranty
High Quality
Delivery by forwarding agency
|
| Customs tariff number | 73090059 |
General
| Rated volume according to EN 12897: | 1500 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable segment insulation |
| Weight [kg]: | 380 |
| Total height including insulation [mm]: | 2215 |
| Diameter without insulation [mm]: | 1000 |
| Diameter with insulation [mm]: | 1315 |
| Tilt height [mm]: | 2250 |
| Heat retaining loss according to EN 12897 [W]: | 63 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,512 |
| Output capacity (45°C) [l]: | 471 |
| Performance indicator NL following DIN 4708: | 12 |
| Real volume according to EN 12897 [l]: | 1464 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Buffet storage tank capacity (part of the actual capacity) [l]: | 1142 |
| Domestic hot water tank volume (Part of the real volume) [l]: | 322 |
| pmax Domestic hot water tank [bar]: | 10 |
| tmax Domestic hot water tank [°C]: | 95 |
| Smooth-pipe heat exchanger [number]: | 1 |
| Smooth-pipe heat exchanger area bottom [m²]: | 4,50 |
| Smooth-pipe heat exchanger volume bottom: | 29,70 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 3/4" |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 1/2" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of screw-in heater [mm]: | 1100 |
Bonjour, où est l'emplacement de la résistance electrique sur un ballon ref 516005424? quelle longueur de resistance ou reference oeg ?Merci
Profondeur d'immersion max. du corps de chauffe à visser : 1100 mm
Merci de télécharger dans la rubrique DOWNLOADS la notice de montage et d´emploi, consultez la page 74