You are here:
-
Print
Connection pipe system for air-to-water heat pumps
OEG no.: 516002674
Pre-insulated pipe-in-pipe system for the underground connection of air/water heat pumps. Equipped with two PE-Xa media pipes and two empty conduits for secure routing of control and supply cables....
All product information Scope of delivery
Delivery by forwarding agency
Pre-insulated pipe-in-pipe system for the underground connection of air/water heat pumps. Equipped with two PE-Xa media pipes and two empty conduits for secure routing of control and supply cables. The flexible, self-compensating design enables simple installation without special tools. The corrugated HDPE outer casing provides reliable protection against mechanical and weather influences.
| Scope of delivery: | |||
| 1 x | Pre-insulated heat pump pipe | ||
| 4 x | Bolted connection 1" ET | ||
| 2 x | Rubber end cap | ||
For more information see Downloads
| OEG no. | 516002674 |
| Pipe diameter [mm]: | 32 x 2.9 |
| Nominal size [DN]: | 25 |
| Outer diameter [mm]: | 125 |
| Length [m]: | 8 |
| Bending radius [mm]: | 600 |
| Temperature range [°C]: | -40 .. 90 |
| Outer material: | HDPE |
| Flow rate [m³/h]: | 1.9 |
| Temperature max. [°C]: | 95 |
| Operating pressure max. [bar]: | 6 |
| Longitudinal thermal expansion coefficient: | 0.15 mm/K |
| Type: | AustroPEX WPP |
| Manufacturer | Armacell |
| Weight [kg] | 15.5 |
| Notes |
Delivery by forwarding agency
|
| Customs tariff number | 39173200 |
Question
(Pipe diameter [mm]: 32 x 2.9 | Length [m]: 8)
Gibt es das Rohrsystem auch in DN25 ausführung
Answer OEG:
Connection pipe system for air-to-water heat pumps hat eine Nennweite von DN 25. Das Rohrsystem mit einem Außendruchmesser von 25 gibt es nicht Standartmäßig.
Technical data sheet (PDF)
- 0.66MB