You are using an outdated browser. Please update your browser now to display the page correctly.
Delivery the next working day
Right of return 14 days
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
Storage tanks A+
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
TÜV Rheinland
Delivery by forwarding agency
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
For more information see Downloads
OEG no. | 516008214 |
Smooth-pipeheatexchanger: | 0 |
Installation type: | Vertical storage tank |
Manufacturer | OEG |
Brand | Pure+ |
Energy efficiency class | A+ |
ErP-Label | |
Notes |
Storage tanks A+ 10-year warranty High Quality Clean fresh water generation in corrugated stainless steel pipe with flow heater principle TÜV Rheinland Delivery by forwarding agency |
Customs tariff number | 84191900 |
Rated volume according to EN 12897: | 200 |
Colour: | silver |
Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
Weight [kg]: | 61 |
Total height including insulation [mm]: | 1265 |
Diameter with insulation [mm]: | 610 |
Tilt height [mm]: | 1375 |
Heat retaining loss according to EN 12897 [W]: | 31 |
Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,744 |
Output capacity (45°C) [l]: | 115 |
Performance indicator NL following DIN 4708: | 1,20 |
Real volume according to EN 12897 [l]: | 205 |
pmax Tank [bar]: | 3 |
tmax Tank [°C]: | 95 |
tmin Tank [°C]: | 20 |
DHW heat exchanger area [m²]: | 2,80 |
DHW heat exchanger volume [l]: | 12 |
pmax DHW heat exchanger [bar]: | 6 |
tmax DHW heat exchanger [°C]: | 95 |
Connection layout: | 180° |
Connection sensor [Ø mm / terminal]: | 6 mm |
Connection cold / hot water: | R 1 1/4" |
Connection heat generator [thread]: | R 1" |
Connection heating element [thread]: | Rp 1 1/2" |
Max. immersion depth of screw-in heater [mm]: | 500 |
Bonjour,
Non, le piquage B est prévu pour le retour de l'échangeur thermique à tube lisse.
Cordialement,
Votre équipe OEG
Bonjour, concernant l'appoint électrique. Nous souhaitons utilisé uniquement l'appoint élécrique en période d'été. Quel est le volume d'eau chaude disponible pour une température ecs de 45°C et Tefs de 15°C ? Peut t on mettre la résistance plus bas car le volume d'eau au dessus de la résistance est faible?
Bonjour,
Ce ballon n´a pas de raccord pour mettre la résistance en bas. Il fraudrait prendre un ballon sur mesure et prendre une résistance suffisamment grande, puisque l'eau froide "se trouve" en dessous et que la puissance nécessaire soit proportionnellement plus élevée.
Hallo, alle datasheets, etc. zijn te vinden in de webshop bij het artikel onder Downloads. We kunnen u niet meer bestanden leveren.