The structure of these storage tanks is fundamentally different from usual large-volume domestic water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water and serves as a powerful heat exchanger at the same time...
All product informationRelated products
Storage tanks A+
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
Delivery by forwarding agency
The structure of these storage tanks is fundamentally different from usual large-volume domestic water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water and serves as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a flow heater.
The drinking water flows through the corrugated stainless steel pipe in the water of the heated tank only if required. This leads to a very low energy consumption and legionella-free drinking water. You will not need a legionella protection programme in the control. At all times, the consumer is provided with hygienically clean, fresh water in the desired temperature.
The horizontal positioning of the fresh-water storage tanks allows for the use in places that must be ruled out for vertical storage tanks (e.g. below inclined walls and stairs). Thus, your customers can benefit from the advantages of a fresh-water storage tank even if space is limited.
Due to the horizontal installation of the heat exchangers, an efficient thermal stratification is achieved. The generously dimensioned heat exchanger surfaces provide a huge energy advantage compared to other products available in the market. Due to the additional heat exchanger, more heat generators can be integrated and their energy can be used in the fresh-water storage tank.
For more information see Downloads
| OEG no. | 516006360 |
| Colour: |
 Silver 
|
| Additional heat exchanger: | 1 |
| Installation type: | Horizontal storage tank |
| Manufacturer | OEG |
| Brand | Pure+ |
| EAN | 4055668000622 |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
Delivery by forwarding agency
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 300 |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 111 |
| Total height including insulation [mm]: | 700 |
| Width [mm]: | 610 |
| Length [mm]: | 1750 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 36 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,864 |
| Output capacity (45°C) [l]: | 175 |
| Performance indicator NL following DIN 4708: | 1,60 |
| Real volume according to EN 12897 [l]: | 300 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| DHW heat exchanger area [m²]: | 2,50 |
| DHW heat exchanger volume [l]: | 11 |
| pmax DHW heat exchanger [bar]: | 6 |
| tmax DHW heat exchanger [°C]: | 95 |
| Zusatzwärmetauscher Fläche unten [m²]: | 1,70 |
| Zusatzwärmetauscher Volumen unten: | 8 |
| pmax Zusatzwärmetauscher [bar]: | 6 |
| tmax Zusatzwärmetauscher [°C]: | 95 |
| Connection layout: | front/rear |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | Rp 1 1/4" |
| Connection heat generator [thread]: | R 1" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 600 |
even voor mijn helderheid, de boiler bevat het cv water en door de spiraal loopt het warme tapwater? met de gemiddelde warmtepomp krijg ik niet veel meer als 55 graden cv zijdig, na verwarming zou verstandig zijn neem ik aan? een boiler met extra wisselaar zou in eerste instantie afgedopt kunnen worden tot aanschaf van extra warmtebron?
Goedenavond,
U hebt gelijk, de boiler werkt als een buffervat met een geïntegreerde doorstroomverwarmer, waarbij u met een boilertemperatuur van 55 °C er verstandig aan doet, een na-verwarmer (elektrisch) te installeren.
kan ik deze horizontale tank ook gebruiken voor een warmte pomp of is daar een andere boiler beter voor ik heb een totale hoogte van 1,25 meter
Goedemorgen,
Ja dat is hiermee mogelijk, de warmtepomp wordt dan direkt op het vat aangesloten.
Waar kunnen de technische sheets van de boilers gedownload worden?
Dat kan eenvoudig via onze website.
Geef het artikelnummer in.
Onder de tab "download" vindt u alle beschikbare technische informatie.
Opmerking: u dient hiervoor wel ingelogd te zijn.