You are using an outdated browser. Please update your browser now to display the page correctly.
Electric ball valve for cold and hot water, compressed air and oils. Ideal for high flow rates with low pressure loss. Controlled opening, therefore no pressure surges. The motor is closed via a continuous...
All product informationSuitable for drinking water
Electric ball valve for cold and hot water, compressed air and oils. Ideal for high flow rates with low pressure loss. Controlled opening, therefore no pressure surges. The motor is closed via a continuous phase and only requires one switching contact to open. A changeover contact is not required.
For more information see Downloads
| OEG no. | 116339772 |
| Connection: | 1" |
| Type of connection: | Female thread | Female thread |
| Design: | Medium heavy |
| Voltage [V]: | 230 |
| Closing time [s]: | 90°|30 |
| Temperature range [°C]: | -10 .. 80 |
| Protection type [IP]: |
IP65 |
| Material: | Brass CW 617 N |
| Type of seal: | PTFE |
| Switch contact: | single-pole switch-on |
| Thread: | ISO 7/1, ISO 228 |
| Pressure stage PN [bar]: | 40 |
| EAN | 8010660133675 |
| Also replaces |
|
| Weight [kg] | 1.46 |
| Notes |
Suitable for drinking water |
| Customs tariff number | 84818081 (IT) |
Sehr geehrte Damen und Herren, können Sie mir sagen ob bei diesem Produkt wenn der Strom weg ist ob das Ventil dann von alleine schließt oder in der gerade befindlichen Position bleibt. Bin auf der Suche nach einem Motor-Kugelhahn der wenn er kein Strom bekommt automatisch schließt. Vielen Dank im Voraus
Nein, federbelastet arbeiten die Motorkugelhähne leider nicht. "Einpolig-einschaltend" benötigt eine Steuerphase und eine permanente Phase um wieder zu schließen. Es wird kein Wechselkontakt benötigt -den die meisten Regelung ja nicht bieten.