Solenoid valve GSR B 4328/1002/.322 2", 230 V, 50 Hz

2/2 solenoid valves
Positively controlled
Closed in a de-energized state
Fields of application:
2/2 way solenoid valves of the series 43 can be used in closed circuits since the valves work without a pressure difference because of the
positively controlled diaphragm. Typical fields of application are HVAC and general mechanical engineering.
Type of protection IP65. Installation only with upright magnets!
Delivered with connector plug.
Solenoid coils 012 / T012
012/T012 coils correspond to VDE 0580.
Power consumption: approx. 43/24 VA
Rel. duty time: 100 %
Operating voltage: +5 / -10 %
Possible coil voltages:
24 V =, 24 V, 42 V, 230 V ~ (50 Hz + 60 Hz)


Media: Air, water, neutral gases
Temperature: -10 - +90°C
Seal material: NBR


Media: Water, hot water, vapour
Temperature: -10 - +130°C
Seal material: EPDM design-TM


Media: Oil (also synthetic), fuel
Temperature: -10 - +100°C
Seal material: FKM


Ambient temperature: -10°C / +35°C
Viscosity: max. 22 mm²/s-1
Burst pressure: > 60 bar

For more information see Downloads