Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
Related products
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
TÜV Rheinland
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
For more information see Downloads
| OEG no. | 516008234 |
| Smooth-pipeheatexchanger: | 0 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Brand | Pure+ |
| Notes |
10-year warranty
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
TÜV Rheinland
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 1000 |
| Colour: | white |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable segment insulation |
| Weight [kg]: | 265 |
| Total height including insulation [mm]: | 2350 |
| Diameter without insulation [mm]: | 790 |
| Diameter with insulation [mm]: | 1015 |
| Tilt height [mm]: | 2280 |
| Heat retaining loss according to EN 12897 [W]: | 55 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 1,320 |
| Output capacity (45°C) [l]: | 571 |
| Performance indicator NL following DIN 4708: | 6,40 |
| Real volume according to EN 12897 [l]: | 996 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| DHW heat exchanger area [m²]: | 8 |
| DHW heat exchanger volume [l]: | 34 |
| pmax DHW heat exchanger [bar]: | 6 |
| tmax DHW heat exchanger [°C]: | 95 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | Rp 1 1/4" |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 800 |
Bonjour, Pouvez-vous me confirmer que l'isolant peut-être enlevé pendant la manutention? Merci.
Bonjour,
Tous les ballons à partir de 800 à 1500 litres sont livrés avec une isolation à segment amovible.
sind die werksseitig montieren kunststoffkappen auf den 1 1/2" anschlüssen für den betrieb gedacht/geeignet?
Guten Tag,
die Kunststoffkappen sind lediglich als Transportschutz aufgebracht und somit nicht für den Betrieb geeignet.
le debit d'eau chaude avec un primaire à 70°C est de combien ?
Bonjour,
Vous trouverez ces informations sur la fiche technique disponible à télécharger.
Le chiffre NL est de 6,4. Le débit de soutirage est de 571 litres à une température de ballon de 65°C et une température d'eau froide de 10°C.
Cordialement,
Votre équipe OEG