Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks...
Related products
10-year warranty
Delivery by forwarding agency
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
Fresh-water storage tank for highest demands on drinking water hygiene and energy efficiency.
The structure of the storage tank is fundamentally different from usual large-volume domestic hot-water tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water, while serving as a powerful heat exchanger at the same time. Thus, the advantages of a buffer tank are combined with those of a continuous flow water heater.
The heating water serves as actual heat storage while the drinking water flows through the corrugated stainless steel pipe only if required and, thus, a legionella-safe domestic water heating is ensured. You do not need a protection programme against legionella in the controller. At all times, the consumer is provided with hygienically clean, fresh water at the desired temperature.
Due to the two additional smooth-pipe heat exchangers, more heat generators can be integrated at any time and their energy can be fed into the fresh-water storage tank.
For more information see Downloads
| OEG no. | 516005298 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Brand | Pure+ |
| Notes |
10-year warranty
Delivery by forwarding agency
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 2250 |
| Colour: | silver |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | removable PES fleece insulation 0.036 W/(mK) |
| Weight [kg]: | 415 |
| Total height including insulation [mm]: | 2165 |
| Diameter without insulation [mm]: | 1250 |
| Diameter with insulation [mm]: | 1450 |
| Tilt height [mm]: | 2240 |
| Output capacity (45°C) [l]: | 1142 |
| Performance indicator NL following DIN 4708: | 10 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| DHW heat exchanger area [m²]: | 9 |
| DHW heat exchanger volume [l]: | 39,50 |
| pmax DHW heat exchanger [bar]: | 6 |
| tmax DHW heat exchanger [°C]: | 95 |
| Smooth-pipe heat exchanger [number]: | 2 |
| Smooth-pipe heat exchanger area bottom [m²]: | 4,90 |
| Smooth-pipe heat exchanger area top [m²]: | 2,50 |
| Smooth-pipe heat exchanger volume bottom: | 32 |
| Smooth-pipe heat exchanger volume top: | 16 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 90° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | Rp 1 1/4" |
| Connection heat generator [thread]: | Rp 1 1/2" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 1100 |
hello, I am looking to fit this in a new build property, could you please advise if this is the correct model for high demand (20 persons) within short time frames, thanks
Hello,
in the Downloads of the article you will find a request form. Please fill it out and send it to [email protected]
After receiving the form, we will be happy to check the corresponding Tank for you.
With kind regards
bonjour j'aimerais connaître la constante de refroidissement de ce ballon. cette constante s'exprime en wh/jour/°K merci
Bonjour,
Nous ne connaissons pas la constante de refroidissement de ce ballon. Cependant, la valeur U de l'isolation de 100 mm est de 0,036W/mK.
Cordialement,
Votre équipe OEG