Stai utilizzando un browser obsoleto. Si prega di aggiornare il browser per visualizzare correttamente la pagina.
Premium built-under fresh-water storage tanks for the highest demands on drinking water hygiene and efficiency.
The built-in corrugated stainless steel pipe separates the drinking water from the...
Tutte le informazioni sul prodottoPremium built-under fresh-water storage tanks for the highest demands on drinking water hygiene and efficiency.
The built-in corrugated stainless steel pipe separates the drinking water from the heating water and also serves as a high-performance heat exchanger. This combines the advantages of a buffer storage tank with those of an instantaneous water heater.
The drinking water only passes through the corrugated stainless steel pipe in the water of the heated cylinder when required. This guarantees very low energy consumption and legionella-safe drinking water. You do not need a legionella protection programme in the control unit. At all times, the consumer is provided with hygienically perfect, fresh water at the desired temperature.
The storage tank is designed with connections towards the top, and its compact design makes it particularly suitable for DHW heating as a built-under fresh-water storage tank with wall-mounted heaters. The dimensions have been selected so that it is replacement-compatible with the built-under storage tanks of many renowned manufacturers. The storage tank can also demonstrate its strengths in new installations in conjunction with wall-mounted heaters.
The vertical, compact design even allows the use in places that must be ruled out for other cylinders (e.g. below sloping ceilings and stairs). This allows the benefits of a fresh-water storage tank to be utilised even where space is limited.
The generously dimensioned heat exchanger surfaces provide an enormous energy advantage over other products available on the market.
Per ulteriori informazioni consultare Download
| Codice OEG | 516005736 |
| Tipo di installazione: | accumulo verticale versione a basamento |
| Produttore | OEG |
| Marchio | Pure+ |
| EAN | 4055668003777 |
| Classe di efficienza energetica | A+ |
| ErP-Label |
|
| Avvisi | |
| Codice doganale | 84191900 |
| Capacità nominale a norma EN 12897: | 80 |
| Colore: | argento |
| Isolamento secondo la DIN 4102-1 con classe di protezione antincendio B2: | Pannello isolante espanso rigido |
| Peso [kg]: | 35 |
| Altezza totale con isolamento [mm]: | 620 |
| Diametro con isolamento [mm]: | 610 |
| Misura diagonale [mm]: | 850 |
| Classe di efficienza energetica conforme al regolamento UE numero 812/2013: | A+ |
| Perdita termica secondo EN 12897 [W]: | 23 |
| Perdite di calore in stand-by secondo la norma EN 12897 [kWh/24h]: | 0,552 |
| Portata (45 °) [l]: | 50 |
| Coefficiente di resa termica a norma DIN 4708: | 0,60 |
| Volume effettivo conforme alla norma EN 12897 [l]: | 80 |
| pmax Serbatoio [bar]: | 3 |
| tmax Serbatoio [°C]: | 95 |
| tmin Serbatoio [°C]: | 20 |
| Scambiatore di calore per acqua potabile [m²]: | 1,40 |
| Scambiatore di calore per acqua potabile volume [l]: | 6 |
| pmax Scambiatore di calore per acqua potabile [bar]: | 6 |
| tmax Scambiatore di calore per acqua potabile [°C]: | 95 |
| Provvedimento di raccordi: | Raccordo in alto |
| Raccordo sonda [Ø mm / morsetto]: | 6 mm |
| Attacchi per prelievo acqua calda/fredda: | Rp 1 1/4" |
| Raccordo generatore di calore [filettatura]: | R 3/4" |
goedendag, ik heb een vraag ik heb de boiler ontvangen en heb niet gerealiseerd dat het hier een doorstroomtoestel betreft. nu is het plan de boiler indirect op te warmen met een 5kw warmtepomp nu vraag ik mij af hoeveel warmwater geeft dit toestel dan en hoeveel L/min van 55graden? Of is het te vergelijken met een normale boiler van 80L? graag even advies? alvast bedankt.
De opslagtank heeft een vulcapaciteit van 45 °C (opslagtank 65 °C, koud water 10 °C, geen heropwarming) van 50 liter.
Ter vergelijking: de Accumulatore acqua calda a basamento 80 l verticale con attacchi in alto heeft een vulcapaciteit 45 °C van 125 liter.
In den nebenstehenden Datenblättern ist einmal ein Gewicht mit 80 kg und darunter mit 35 kg angegeben. Was stimmt denn nun davon?
Der Speicher hat ein Gewicht von 35 kg, die Angaben mit den 80 kg wurden dementsprechend abgeändert.
Vielen Dank für den Hinweis.
goedemiddag is deze boiler ook geschikt voor de warmtepomp? de hoogte welke beschikbaar is 170 cm [kelder] met vriendelijke groet P van der Haak
Helaas is deze boiler niet geschikt voor een warmtepomp, omdat deze vrij hoge temperaturen vereist en slechts een zeer lage tapcapaciteit heeft.
kan er op de vers water boiler een electrische weerstand peplaast worden?
Hiervoor is geen aansluiting aanwezig. eventueel kan een speciale boiler op maat gemaakt worden.
sind diese Speicher bereits bestellbar?
Ja, die Speicher sind jederzeit bestellbar, rechnen Sie bitte mit einer Lieferzeit von ca.2-3
Tagen. Sollte die Speicher nicht am Lager sein, sollten Sie mit ca. 10 Tagen Lieferzeit rechnen.