Calibratore per tubi di collegamento 20 x 2,25 mm per attuatore a batteria

Codice OEG: 802030375
Zoom Calibratore per tubi di collegamento 20 x 2,25 mm per attuatore a batteria
Codice OEG : 802030375

4 Funzioni in un unico strumento!

Con il calibratore per tubi compositi OEG si smussa il tubo all' interno, all' esterno e nella parte anteriore in un' unica operazione...

Tutte le informazioni sul prodotto
Prodotti simili
In acciaio

In acciaio

In acciaio
Wipe 'n' Buy ®
Wipe 'n' Buy

4 Funzioni in un unico strumento!

Con il calibratore per tubi compositi OEG si smussa il tubo all' interno, all' esterno e nella parte anteriore in un' unica operazione. Inoltre, il diametro interno è calibrato per un' ulteriore lavorazione.

Non potrebbe essere più facile!

Con guida esagonale per uso professionale in un cacciavite a batteria.

Il calibratore per tubi compositi è realizzato in acciaio temprato di alta qualità.


Codice OEG 802030375
Materiale: Acciaio temprato
Diametro interno [mm]: 15,5
Diametro esterno [mm]: 20
Spessore di parete [mm]: 2,25
Produttore OEG
EAN 4055668021658
Peso [kg] 0,05
Avvisi
In acciaio

In acciaio

In acciaio
Codice doganale 82079091
it
Domanda:

The description quotes: Calibration tool for multilayer pipe 20 x 2.25 mm for cordless screwdrivers, however the silvertec line of products requires a 20x2.0 mm tube size. (the 20x2.25 is however used for Uponor). Does this mean that this calibrator is not ideally suited for the Silvertec line offered by OEG? (I would like to use it to widen the Uponor 20x2.25 mm tubing to 20x2.0 mm tubing so I can still use Silvertec fittings on them).

Risposta OEG:

Good morning.

The calibration tool is made for multilayer composite pipes. We don't write especially that these are calibrators are only suitable for silver tec pipes. When you've got an Uponor pipe with an wall thickness of 2,25mm you just need a calibrator for such a pipe. Finally it's an easy matter, because you have to wide the pipe just a bit for better pushing on the fitting. The calibrator needs a little resistance. Is it too high or the pipe semms to be too tight than it's wrong. Too slim, of course not the right one too. So this kind of calibrators are universal suitable for multilayer composite pipes, if not you have to buy one of every manufactuer of such pipes and for every size of them...

Per poter fare la domanda deve prima effettuare il login

Al momento non ci sono delle valutazioni di clienti

Per poter immettere una valutazione sull'articolo deve prima effettuare il login