Hot-water storage tanks for heating up domestic water by means of boilers and low-temperature systems of all manufacturers.
The inner surface of the storage tank is coated with a high-quality enamelling...
Related products
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
TÜV Rheinland
Hot-water storage tanks for heating up domestic water by means of boilers and low-temperature systems of all manufacturers.
The inner surface of the storage tank is coated with a high-quality enamelling. The generously dimensioned heat exchanger surface that reaches down to the bottom ensures excellent heat transmission. A laterally positioned service hatch makes it possible to maintain and clean the storage tank conveniently, and it can be fitted with an electric heating element if required. The unrivalled OEG vacuum insulation of the storage tanks ensures there are significantly lower heat losses than the insulations of customary storage tanks.
For more information see Downloads
| OEG no. | 516008003 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Storage tanks A+
Delivery by forwarding agency
10-year warranty
High Quality
TÜV Rheinland
|
| Customs tariff number | 84191900 |
General
| Rated volume according to EN 12897: | 300 |
| Colour: | white |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 98 |
| Total height including insulation [mm]: | 1750 |
| Diameter with insulation [mm]: | 610 |
| Tilt height [mm]: | 1830 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 36 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,864 |
| Output capacity (45°C) [l]: | 471 |
| Performance indicator NL following DIN 4708: | 10 |
| Real volume according to EN 12897 [l]: | 294 |
| pmax Tank [bar]: | 10 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 1 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,15 |
| Smooth-pipe heat exchanger volume bottom: | 7,50 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 1" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 3/4" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of flange heater [mm]: | 420 |
| Max. immersion depth of screw-in heater [mm]: | 500 |
Ik wil dit vat gaan gebruiken om met overtollige zonnestroom de water buffer elektrisch te gaan verwarmen en dan de retour van de cv via een thermo gestuurde driewegklep erdoor te laten lopen , zodat de gasketel minder hoeft te branden , vooral in vóór - en na seizoen , ik heb dan ook een aansluiting in het vat nodig voor een drie fasen element van een in stappen instelbaar vermogen , is dit vat daarvoor geschikt , welke materialen heb ik nog nodig ?
Het flensverwarmingselement van ASKOHEAT kan hiervoor worden gebruikt.
Afhankelijk van het gewenst vermogen kan worden gekozen uit: 2,0 kW tot 6 kW (230 / 400 V)
Bijvoorbeeld OEG artikelnummer Immersion heater with flange 2.0 kW
word de mantel (isolatie) van de boiler afzonderlijk geleverd of is deze vast?
Goedemorgen, de boiler heeft een vast geschuimde A+ isolatie, daarover wordt een soort hoes geschoven.
Op aanvraag kunnen wij een dergelijke boiler ook met een losse isolatie leveren. Neem hiervoor a.u.b. contact met ons op via [email protected] of (+31)
Ce préparteur d'eau chaude peut-il fonctionner en thermosiphon sur une chaudière?
non
You have to be logged in to ask a question
03/09/2015, 09:32:33 of: Mr NEOWATT
Tres bien
J'apprécie le choix de la couleur, le prix et la disponibilité