Two-cylinder system PS 16 bar with automatic changeover valve

50 mbar, 4 kg/h
for the connection to gas cylinders to regulate the pressure to the nominal pressure of the gas equipment.
Consisting of:
- high-pressure hose assembly
- pipe sections
- automatic changeover type AUV
- low-pressure regulator with safety shut-off valve SAV and
  safety pressure relief valve PRV and screwing parts
Advantages and equipment:
- the withdrawal takes place alternately, a cylinder change is possible without interrupting operation 
- gas backflow prevention device: prevents gas from flowing back when the
  cylinder is replaced
- two-cylinder model with RST connector 12 mm
- four-cylinder model with RST connector 12 mm
- six-cylinder model with RVS connector 15 mm
Approval:
- single fittings DIN-DVGW or DVGW-tested or EC type test approval
Note:
For the version with electronic remote display, the maximum cable length is cable length is 25 m (cable cross-section 1.5 mm2).
The dimensioning and design of the liquid gas system (selection of gas
flow monitor, nominal flow rate, nominal diameter etc.) must be carried out in accordance with TRF 2012.
The dimensioning and design of the LPG system (selection of gas flow
flow switch, nominal flow rate, nominal diameter etc.) must be carried out in accordance with TRF 2012.

For more information see Downloads