Plate heat exchanger PWT20 with 30 plates

OEG no.: 513000012
  • Also replaces
    schließen Also replaces: 513000006 (Plate heat exchanger GPWT 1 - 30)
Zoom Plate heat exchanger PWT20 with 30 plates
OEG no. : 513000012

The brazed plate heat exchanger consists of profiled, embossed stainless steel plates turned by 180° in opposition to each other. Due to the thermodynamically optimised corrugation, highly turbulent fluid channels are created with a very efficient heat transfer at low pressure losses...

All product information
Related products
Wipe 'n' Buy ®
Wipe 'n' Buy

The brazed plate heat exchanger consists of profiled, embossed stainless steel plates turned by 180° in opposition to each other. Due to the thermodynamically optimised corrugation, highly turbulent fluid channels are created with a very efficient heat transfer at low pressure losses. A maximum heat transfer is achieved by standardly directing the warm and cold fluids in alternating channels through the heat exchanger.
The plate heat exchanger with a glycol content of up to 40% is solar-compatible and with a chloride content of up to 150 mg/l it is also swimmingpool-compatible.

Note:
Bolted heat exchangers and other sizes on request!


For more information see Downloads


OEG no. 513000012
Plates: 30
Width [mm]: 80
Height [mm]: 194
Material: Stainless steel 1.4401
Connection: 3/4" ET
Surface: 0.336 m²
Operating pressure max. [bar]: 30
Temperature max. [°C]: 200
Type: PWT 20
Manufacturer OEG
Also replaces 513000006
Weight [kg] 2.6
Customs tariff number 84195080
en
Question:

zijn de OEG platenwisselaars geschikt voor drinkwater installaties?

Answer OEG:

Nee, die heeft daar geen goedkeuring voor.

en
Question:

Waar vind ik tekeningen met daarop de fysieke maten van alle (!) PWT wisselaars?

Answer OEG:

Op pagina 9 van de gebruiksaanwijzing (staat bij downloads) vindt u de afmetingen van alle platenwarmtewisselaars en de technische gegevens.

en
Question:

Hallo OEG Team, 1. Welche Leistung in kW hat der WT T20 mit 30 Platten ? 2. Weches Anschlußmaß in mm haben die Anschlüsse waagrecht und senkrecht von Mitte bis Mitte Rohranschluß ? Vielen Dank für die Auskunft ! Mit Grüßen aus Peißenberg Andreas Gstattenbauer

Answer OEG:

Die Leistung des Wärmetauschers ist von der Eingangstemperatur abhängig. Da uns diese nicht bekannt ist, kann hierzu keine genaue Angabe genmacht werden. Die Abmessungen finden Sie in den Downloads/Datenblatt.

You have to be logged in to ask a question

No customer reviews yet

In order to give a review, you have to be logged in.