The brazed plate heat exchanger consists of profiled, embossed stainless steel plates turned by 180° in opposition to each other. Due to the thermodynamically optimised corrugation, highly turbulent fluid channels are created with a very efficient heat transfer at low pressure losses...
All product informationRelated products
The brazed plate heat exchanger consists of profiled, embossed stainless steel plates turned by 180° in opposition to each other. Due to the thermodynamically optimised corrugation, highly turbulent fluid channels are created with a very efficient heat transfer at low pressure losses. A maximum heat transfer is achieved by standardly directing the warm and cold fluids in alternating channels through the heat exchanger.
The plate heat exchanger with a glycol content of up to 40% is solar-compatible and with a chloride content of up to 150 mg/l it is also swimmingpool-compatible.
Note:
Bolted heat exchangers and other sizes on request!
For more information see Downloads
| OEG no. | 513000024 |
| Plates: | 20 |
| Width [mm]: | 124 |
| Height [mm]: | 304 |
| Material: | Stainless steel 1.4401 |
| Connection: | 1" ET |
| Surface: | 0.57 m² |
| Media: | Water with up to 40 % glycol |
| Operating pressure max. [bar]: | 30 |
| Temperature max. [°C]: | 200 |
| Type: | PWT 50 |
| Manufacturer | OEG |
| Also replaces | 513000032, 513000172 |
| Weight [kg] | 4.5 |
| Customs tariff number | 84195080 |
wij zoeken een platenwisselaar met dubbele scheiding
Wij hebben hier nog meer informaties nodig, als wij deze ontvangen gaan we speciaal voor uw een warmtewissellaar aanvragen.
Comment calcule-t-on la puissance de l'échangeur ? Merci.
Le dimensionnement des échangeurs repose principalement sur un calcul de bilan
thermique mais également sur la prise en compte des pertes de charges. Il vous suffit de remplir la demande pour le dimensionnement de l'échangeur thermique qui se trouve dans le catalogue géneral.